The iCarsoft POR V3.0 is a professional multi-system scan tool for Porsche vehicles. Unlike engine code readers; the POR V3.0 can scan, read, and clear diagnostic trouble codes DTCs from most systems including ABS, SRS, Transmission etc. It can also perform a number of advanced functions including oil reset, electronic park brake, battery programming, DPF regen, injector coding, and many more. 

Scan Tool Main Features

  • Fault code read/clear on multiple systems including engine, transmission, ABS and airbag etc
  • Support OBDII/EOBD Ten Modes of Operation.
  • Read Live Data.
  • Applies to the single Brand of most of the Models equipped with OBDIl-16 DLC.
  • Easy To Use With Silicone Keys.
  • Auto VIN technology can automatically identify model and year information in no time.
  • Actuation Test / Bidirectional Test is used to access vehicle-specific subsystem and component tests.
  • Support Freeze Frame of Fault Code functions.
  • Oil Light/Service Reset: Support service lamp reset.
  • Electronic Parking Brake (EPB) system maintenance deactivates and reactivates the EPB system for replacement and initialisation.
  • Battery Management System (BMS), registers new battery to the BMS while battery replacement.
  • Diesel Particulate Filter (DPF) regeneration control system, requests the DPF regeneration process while DPF blockage and turn off the DPF indicator.
  • Electronic Throttle Control system (ETC) relearns the throttle valve control value while clear or replace the throttle valve.
  • Steering Angle Sensor (SAS) calibration, calibrates the steering wheel to straight ahead, or recalibrates SAS while steering part replacement.
  • ABS Bleeding, release the air to restore ABS brake sensitivity or relearn while ABS replaced.
  • Injector coding, relearn the injector control parameter if the injector is renewed or replaced.
  • BCM(Body Stability), This function supports routine maintenance of DSC modules, for example, reset or delete the adaptation values, start-up the unit.
  • ECM(Engine), This function supports routine maintenance of engine modules, for example, reset or delete the adaptation values, calculate fuel consumption.
  • TCM (Trans adaption), This function supports routine maintenance of transmission modules, for example, reset adaptation values, adjust the oil level.
  • Engine idle, This correction can be executed when the idle speed fault is resolved. Adjust the engine speed of the car at idle speed.
  • Air Suspension, Try reset electronic suspension air ride with the message system close all doors flip through message system go to suspension reset or off.
  • TPMS service functions include displaying sensor IDs from the vehicle`s ECU, inputting TPMS sensor replacement lDs, and testing sensors.
  • ACS(Air Conditioner), this function supports routine maintenance of air condition modules, for example, air conditioning system adaption reset, reset air conditioning compressor, run in air conditioning compressor, stepper motor initialisation.
  • Head Lamp is about the headlamp maintenance, maintenance, and other related operations (including AFS setting), and then perform this function for calibration.
  • Seat, after repairing or replacing the seat position drive motor, it is necessary to perform relevant functions for calibration.
  • DER, after repairing or replacing the window lift motor, is necessary to perform relevant functions for calibration.
  • The Print Data function allows you to print out diagnostic data recorded by the scan tool or customised test reports.
  • The battery test allows you to get the voltage of the battery with the OBD port by the scan tool when the engine starts.
  • DTC Library to lookup when the user is operating this tool.
  • Upgrade Via Computer.
  • Multi-language: English, German, Dutch, Spanish, French and more.

Note!

  • Certain functions may be limited by the vehicle manufacturer due to the requirement of a special factory access code.
  • This scan tool covers over 20 years of models, so some functions may not be available on all years/models.

Package Includes

  • POR V3.0 main unit scan tool
  • User's manual
  • Main OBD-II cable
  • USB Cable
  • TF Card
  • Nylon Carry Case
Part Number: icarsoft_por_v1
Brand iCarsoft
SKU icarsoft_por_v3
Shipping Weight 0.5000kg
Shipping Width 0.100m
Shipping Height 0.200m
Shipping Length 0.150m
Shipping Cubic 0.003000000m3

Others Also Bought

More From This Category